CRC 3013 Soft Seal - 300g
I. Product Description
CRC 3013 Soft Seal is a top-tier corrosion inhibitor specifically engineered to provide long-lasting protection for metal surfaces. It forms a dry, transparent, amber wax-like coating that stands up to tough conditions, including exposure to humidity, saltwater, chemicals, and corrosive environments. Perfect for both indoor and outdoor use, it ensures that parts and assemblies remain protected during extended storage or challenging shipping conditions.
Suitable for protecting:
- Electrical circuits and components
- Exterior units of heat pumps and condensers
- Metal parts and assemblies
- Alloy extrusions, dies, and molds
- Battery terminals and connectors
- Operating Temperature Range: -20°C to +100°C
II. Key Features & Advantages
- Comprehensive Protection: Effectively seals out moisture and corrosive contaminants.
- Durable Coating: Creates a dry, transparent, amber film with exceptional resistance to humidity, saltwater, and salt spray.
- Long-Term Durability: The film remains flexible, never becoming brittle or cracked.
- Material Compatibility: Safe for use on plastics, rubber, paint, and insulation materials.
- Easy Reapplication: Can be effortlessly reapplied over existing films or on clean surfaces.
- Simple Removal: Can be removed with CRC Brakleen or mineral spirits.
- Superior Salt Spray Resistance: Survives over 400 hours in salt spray testing (ASTM B117).
- Wide Temperature Tolerance: Effective from -20°C to +100°C.
III. Application Guidelines
- Preparation: Shake the can thoroughly before use.
- Masking: Protect areas that should not be sprayed by masking them off.
- Optimal Temperature: For the best results, use the product when the can is between 16°C and 30°C.
- Application: Spray lightly and evenly from a distance of 30-40cm.
- Additional Coats: For a thicker protective layer, apply multiple coats, allowing each to harden before the next.
- Removal: Use CRC Brakleen or mineral spirits to remove the product.
IV. Product Specifications
- Final Film Thickness: 20-50 µm
- Salt Spray Resistance (ASTM B117): Exceeds 500 hours
- Dry to Touch Time: 12 hours
- Maximum Coverage: 6 m² per 300g can
- Indoor Reapplication Interval: 3 years
- Outdoor Reapplication Interval: 2 years
- Flash Point: Below 0°C
- Specific Gravity @ 20°C: 0.87 ± 0.05
- Viscosity @ 20°C: 200-500cP (Thixotropic)
- Appearance: Amber
- Cleanup Method: CRC Brakleen or mineral spirits
- Temperature Range: -20°C to +100°C
V. Packaging Options
- Part Number: 3013
- Size: 300g Aerosol
Contact our sales consultant in area:
Malaysia, Selangor (Klang, Puchong, Shah Alam, Subang), Kuala Lumpur (Sungai Buloh), Negeri Sembilan (Seremban), Melaka, Johor (Johor Bharu, Muar, Batu Pahat), Pahang (Temerloh, Kuantan), Kelantan (Kota Bahru), Terengganu (Kuala Terengganu), Perak (Ipoh), Kedah (Sungai Petani), Perlis, Penang (Bukit Mertajam, Butterworth, Seberang Prai), Sabah (Kota Kinabalu), Sarawak (Kuching), WP Putrajaya, WP Labuan, Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei
